Description
2014-2024 Dodge Ram 2500 Radius Arm Drop Down Brackets and Hardware
Can be used with Traxda lift kits and with other brands.
It does not push the axle forward. It lowers the rear mounting point for the radius arm to 4 inches lower, which adds back 3 degrees of caster, caster that is lost when you lift the truck.
We did it 4 inches, and not 3.5 to match our spacer, because the way the metal bends and the truck frame contours prevented us from doing it at 3.5 inches
4 inches was needed for clearance.
Installation is easy – remove bolt at back of arm, lower arm, install bracket, raise arm. Reinstall bolts. We supply a 9 inch bolt that is non-stock position, which goes vertically at the rear of the bracket using a thick washer as a spacer. It ties the bracket to the frame using an existing hole in the frame.
Reviews
There are no reviews yet.